You are currently viewing 3D Printed Biped Robot #YouMakeRobots

3D Printed Biped Robot #YouMakeRobots

Make a biped robot with the 3d printed robot kit #YouMakeRobots. This robot is powered by an Arduino MEGA and 8 standard hobby servo-motors. YouMakeRobots is a set of 3d printed parts, electronics and software that work together to provide a fun, accessible and affordable robot building experience. Very similar to Lego bricks, the modular construction allows you to put together simple components to build a wide variety of robots. It is easy to get started. For less than $ 100 you get all the electronics, no soldering required. The 3d printed parts are easy to print and print without support. The code provided allows you to interactively control the robot from the command line.

What you need

4xF1
8xF3
1xF6 (optional, for the head)
8xServo_Enclosure_Bottom
8xServo_Enclosure_Top
8xServo_Horn
8xServo_Pin
2xF51
1xArduino Mega 2560
1xMEGA Sensor Shield V1 for Arduino MEGA 2560
1xXL4016E1 DC-DC converter 5-40V to 1.2-35V
8xTower Pro MG996R Servo
1x Cable USB 2.0 A-Male to B-Male -10 feet (3 meters)
1x Set of 4 hexagonal screwdrivers (1.5 mm, 2mm, 2.5mm and 3mm)
1x11.1V 3S 1000mAh Lithium-Polymer Battery
32xM2x8mm self tapping screw
16xM2x4mm Hex Socket Head Cap Screws
24xM2x6mm Hex Socket Head Cap Screws
40xM2x8mm Hex Socket Head Cap Screws
44xM2 Nuts
DISCLAIMER: Some links are affiliate links. As an Amazon Associate I receive a small commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links

Assembly

Additional Ressources

See https://www.youmaketech.com/3d-printed-robot-kit-youmakerobots/